Underbody Exhaust MED EF-GDK

Ir a la tienda de la marca Leo Vince

Silenciadores made in Italy

Leo Vince: un nombre que despierta emociones en motoristas de todo el mundo. La empresa familiar de Monticello d'Alba, cerca de Turín, lleva fabricando sistemas de escape y silenciadores desde 1954. Casi ningún otro fabricante de sistemas de escape ha conseguido consolidar su imagen de calidad y rendimiento de forma tan constante durante los últimos veinte años. En Louis encontrará silenciadores slip-on y bolt-on de Leo Vince para diferentes modelos de moto. Lo que todos tienen en común es una mano de obra de alta calidad y el inconfundible sonido de Leo Vince. Las victorias en las pruebas de las revistas de motos y los títulos de los campeonatos europeos y mundiales son prueba de la capacidad innovadora y la superioridad de Leo Vince.

Modern vehicle accessories of different types now frequently carry an "E" approval mark valid throughout Europe. This "E" mark, which is made up of a combination of letters and numbers, is clearly displayed on the product and shows the application tested, the country in which testing was carried out and, where appropriate, the vehicle type to which approval applies. EC type approvals for exhaust systems, for example, are always issued for a specific vehicle type, whereas in the case of lighting, they apply to an entire group of vehicles, e.g. motorcycles.
This certification mark is the sole proof of legality stipulated by law, i.e. no written report or entry in the vehicle documents by a TÜV (German Technical Inspection Association) test centre is required. However, when it comes to installing accessories, the relevant guidelines of the Road Traffic Licensing Regulations (StvZO) must always be observed.
At a roadside check or a TÜV vehicle inspection, the registered keeper is only required to show the "E" mark. It is then up to the official in charge whether to check the mark with the Federal Motor Transport Authority (KBA) in Flensburg (or equivalent type approval authority in other countries), which is able to decode all certification marks.

Stainless steel is a collective term for rustproof steel. It is much more resistant to corrosion than non-alloyed steels. Stainless steel does not deteriorate, and is hygienic, UV-resistant, non-corroding, fracture-proof, non-toxic and environmentally friendly. It does not weather and can be recycled in its entirety, even after many years. Technically, the term "stainless steel" refers to corrosion-resistant steel alloys with a wide variety of compositions but always containing a high percentage of chromium (usually a minimum of 10.5%)

.

MAINTENANCE:
Stainless steel should be cleaned regularly like all other materials, especially after exposure to salty air (near the coast), and also at regular intervals.
Water can easily collect in corners, edges and screw connections, resulting in corrosion. So careful cleaning is important, and if necessary screws should be undone in order to clean the parts thoroughly.
Do not leave rusty steel parts against stainless steel to avoid the rust "contamination".